Layering SEF Geat Transfer Films
When layering SEF films it is important to first check the surface of the fabric
and make sure it will handle the extra heat and is free of any repellent.
Flex on flock is not recommended, but flock on flex is no problem.
Reduce time for the first layers (3 or 4 seconds). Use recommended time
settings on the last top layer.
THE OFFSET DEPENDS 99% ON THE KNIFE AND NOT ON THE CUT MATERIAL.
> Waterbased PU
> OEKO-TEX® Class II
> Thickness (without liner): 60µ
> Fastness: 60°C
> Transfer Temperature: 165°C (330°F)
> Transfer Time: 17 seconds
> Pressure: Medium/High Hot peel
SUITABLE FOR STANDARD TEXTILES