Characteristic:
High brillance of colours
Good scratch resistance
Wide range of applications
Crystal clear view
Finish:
crystal clear, glossy
Compatibility
Useable on most large format Ink Jet printers using solvent ink systems.
Useable on most large format Ink Jet printers using UV curing ink systems.
Handling
Note for temperature setting: Before printing you must check that the correct
drying temperature has been set by carrying out a trial print. Too high drying
temperatures can lead to a deformation of the film which can later cause
further problems while processing.
Note for Drying time / Processing: The VOC which are contained in solvent
and latex inks must be fully dried before further processing. For this reason
it is necessary to take long enough drying times into account. The drying
time of the printed media depends very much on the quantity of solvent applied.
When printing the film in a roll-to-roll process, the printed strip must be
unrolled and laid flat as soon as possible until final drying. Solvent residues
due to insufficient drying times can lead to blocking during transport in
rolled-up form. During lamination such residues can negatively impact the
quality of the finished product (flatness, shrinkage behaviour, anchorage, etc…).
It is necessary to protect the surface if it is subject over a long time to
abrasion or any other mechanical influences, to dirt or humidity. The lamination
can be done right to the edges or over the edges. The user should check
before using what is more appropriate.
We recommend to use self-adhesive laminating foils for cold lamination
or appropriate liquid lamination products.