SEF FlexCut X 0,5x1m OBS rabat fra 5m.
RABAT (trækkes ved fakturering)
v. 5m. -35%
v. 25m. -39%
FlexCut X is an exclusive heat transfer flex film !
Designed for cutting plotters. 100% polyurethane FlexCut X ensures fine, elastic and resistant designs, with an extremely soft touch. Its adhesive liner allows very fine cutting and fast weeding.
ADVICES:
Layering SEF Heat Transfer Films
When layering SEF films it is important to first check the surface of the fabric
and make sure it will handle the extra heat and is free of any repellent.
Flex on flock is not recommended, but flock on flex is no problem.
Reduce time for the first layers (3 or 4 seconds). Use recommended time
settings on the last top layer.
THE OFFSET DEPENDS 99% ON THE KNIFE AND NOT ON THE CUT MATERIAL.
> Waterbased PU
> OEKO-TEX® Standard 100 Class II
> Thickness (without liner): 60µ
> Fastness: 60 °C
> Transfer Temperature: 160 °C
> Transfer Time: 4 seconds
> Pressure: Medium/High
> Hot peel
or
> Transfer Temperature: 135 °C
> Transfer Time: 12 seconds
> Pressure: Medium/High
> Hot peel
SUITABLE FOR STANDARD TEXTILES