Settings for VelCut
The cutting line must not be visible on the adhesive liner; if it does your blade
is setup too deep. The blade has to cut the hotmelt but not the flock layer.
If your blade is set properly you can cut flock even with a 45° blade.
> Base: Hotmeltfilm
> Adhesive: Waterbased
> Flock: Polyamide
> OEKO-TEX® Class II
> Thickness (without liner): 500µ
> Fastness: 60°C
> Transfer Temperature: 160-170°C
> Transfer Time: 15-17 seconds
> Pressure: low/Medium
SUITABLE FOR STANDARD TEXTILES